Blaze Duo
Dual station cobot weld cell for simultaneous setup and welding
-
Designed and built in the USA with direct factory support
-
7-axis positioning allows more welds without refixturing
-
Live video monitoring—no visors required
-
Unrestricted access with LED lighting
-
Fume extraction
-
Zero programming, unlimited weld capability
-
Auto Continuum 350 Welder
Blaze Duo Specifications at a glance
Simultaneous setup & automated welding
Dual stations allow operators to prepare the next job on one side while the cobot performs welding on the other, maximizing productivity and reducing downtime.
With integrated filtered fume extraction, Blaze Duo provides a safe and cost-effective automation solution to run high volume jobs while staying competitive.
Live video monitoring
In place of traditional viewports, Blaze Vision™ monitors provide safe, live video of welding in progress, in crisp detail. Welding visors, goggles, or welding screens are not required.
Unrestricted access with LED lighting
Double doors at each weld station open fully to allow complete and unrestricted access to the large 4 ft x 8 ft weld table and all setups. Built in bright LED lighting provides perfect illumination for setting up jobs.
Blaze Automation Advantages
Automate repetitive welds
Free your skilled welders to perform more high value work and eliminate the fatigue and monotony of repeat welds.
Double productivity at a minimum
Lower the cost per weld and eliminate or reduce post weld grinding and cleanup. Work at the highest possible arc-on time with perfect weld repeatability.
Strengthen teams & empower welders
Cobot welding automation allows core teams to pivot quickly, stay ahead of labor challenges and work confidently with cutting edge technology.
Zero programming tablet
Software that stays out of your way
Teaching: Teach-by-Touch
Motion: 7-Axis torch positioning
Weld Library: Unlimited
Weld Speed: Up to 2,540 mm / 100 in per minute
Welding Modes: Continuous, Tack, Stitch, Weave
Repeatability: +/- 0.1 mm (.004”)
Unlimited weld complexity,
drag & drop simplicity
Complete control and customization of all welding parameters, including: material type, weld speed, wire speed, gas flow control, weld pattern and more. Simply select your desired recipe, or customize the recipe as you choose. Any job is easily learned in minutes, from simple to complex paths.
7-axis welding saves time & money
Get more weldments done in a single setup with 7-Axis, versus having to re-fixture with a 6-Axis robot. Only a 7-Axis robot can reach around all sides of fixtures and workpiece obstacles without restriction.
Teach a job faster than welding it once by hand
Blaze is the ultimate in ease-of use —you can teach a job faster than doing it once by hand and trust Blaze to repeat the job with clean, precise welds every time.
Manual weld trigger
Blaze has the unique feature of being able to quickly and easily remove the torch to do tacking or complex welds by hand. There’s also a live trigger on the torch for spot welding and more.
Ergonomic control handle
Use the control handle to physically teach Blaze to weld, without programming. Show Blaze the start and end of welds, tack points, circles or any complex shape at the touch of a button.
Flexibility
Stay agile with fast short run changeovers and zero reprogramming on repeat jobs. Blaze adds efficiency to high mix or low mix, short runs or long runs, and can be repurposed quickly to meet changing demands.
Automate with confidence. It's easy to get started.
Included with all Blaze collaborative robots
Sealed control computer
Fully integrated electronics. Sealed cabinet protects all electronics from metal dust and gunk.
Specifications
IP Rating: IP61
Communications Hardware: Ethernet 100MB
Protocols: Ethernet IP, TCP/IP, Modbus
Power: 100-240 VAC 50-60 HZ
USA direct factory support
Fast online support by our welding and robotics experts at our US factory. We speak your language.
Zero programming tablet
Using visual ‘tiles’ and a drag & drop interface, Blaze’s control tablet is incredibly intuitive to use.
Specifications
IP Rating: IP41
Connection: USB
Dimensions: 253 mm x 125 mm x 37 mm (10” x 5” x 1.5”)
Cable: 5 meters (16 ft)
Updates, info & resources
Access a comprehensive library of documentation, including product manuals, user guides, video tutorials and software downloads.
Request a quote
Questions or unique requirements? We'll respond quickly and are always ready to talk, offer ideas and discuss solutions. Many shops find it helpful to see our cobot capabilities and unmatched ease of operation in an online demo.
Challenge us! Our cobots can easily automate almost any task—and anyone can use them.